Shower hose leakage how to do?

Shower hoses make our showers more convenient, but they are often pulled at random during use, and are therefore very vulnerable to damage. Once the shower hose leaks, we need to find out the reason and replace it. Come and talk to everyone today about shower hose leaks that should be dealt with.

1. Possible causes: Improper installation, deformation of the rubber ring, uneven or thin water outlet pipe fittings, hoses and showers do not match.

Maintenance method: Select the appropriate hose and shower according to the specifications, replace the rubber ring, and reinstall it.

2. Possible cause: The hose is broken.

Maintenance method: Replace a new hose on it.

3, the probable cause: improper adjustment, foreign material and more scale.

Maintenance method: adjust the shower nozzle rotation. If it does not work, put a small round cap in the middle of the shower head with a small flat-blade screwdriver, unscrew the screw with a Torx screwdriver, open the shower and rinse it with water to brush the shower hole, and then install and restore.

Choose the right shower hose:

Shower hoses Various metal hoses, braided hoses, pvc reinforced tubes. Different materials have written differences. There is no absolute answer for which one is specific. When you buy in a hardware store, you can compare several materials. The key surface has evenness, uniform gap, smooth touch, natural deployment, firm structure, and strong resistance to damage. In addition, the size of the shower hose must conform to the shower head. The general dimensions are 14mm, 16mm, 17mm and 18mm in outside diameter. You can take the old hose and buy a new one for better comparison.

First you must replace the old hose and manually twist the flower hose from the shower and the faucet. And then put on a new shower hose, one end screwed on the shower head and the other screwed on the outlet tap, all screwed on it. However, with some effort, the men generally do the labor, and the girls help cheer up and wipe the sweat.

Shower hose use problem

The connection between the shower hose and the inlet pipe is connected to the valve body by a screw cap hose and fixed. The problem is that the screw cap gradually loosens, rusts, and even falls off as time passes.

The bigger problem is that during the bathing process, this hose pull is the most frequent, and the amplitude is often very large, which can cause the metal hose to break with the screw cap. What's more, the other end of the hose is connected to the shower head in the same way. If the owner is not operating properly, such as using too much force, it is also easy to break.

We have never seen a break in the middle of the metal hose and both ends are perfectly intact. Is this not the case? Many users have not paid attention to this point, and there is no maintenance knowledge in this area.

How to maintain the shower hose

When we talked about here, we should already understand how shower hoses should be maintained. Here are some points for your reference:

First of all, everyone should keep the metal hose in a natural stretch during normal showers. When it is used, the shower head should be inserted into the rack. Do not coil the metal hose around the shower faucet.

Secondly, when pulling the hose, it is necessary to prevent hoses and valve body joints from forming a dead knot. Be careful to look at it. Pull the hose harder. This will prevent the metal hose from being broken or the hose Causes damage.